Horizontal Lifting Clamp

HORIZONTAL LIFTING CLAMP Item Code: 306### Capacity: 1000-10000 kg

Features

• It is especially suited for the transport of single plates with a minimum thickness of approx.
  5 mm as well as for plate bundles.
• The two-legged version is appropriate for normal sized plates.
• For extra large or long plates, it is recommended to use two sets of the two-legged
   lifting gearsin conjunction with a spreader beam.
• In the standard version, the lifting clamp is suitable for plates up to 1500 mm width. Lifting
   gears with longer chains for larger plate widths are available upon request. The capacity
   applies to a pair of lifting clamps
• Single clamps are also available.

Technical Parameters

Item Code	Capacity (pair/kg)	Jaw opening (mm)	Dimensions (mm)										Weight(kg)
			A	B	C	D	E	F	G	H	I	J
306010	1000	0-50	135	75	18	15	82	65	100	32	44	13	4
306020	2000	5-32	160	90	22	32	83	61	100	49	72	19	5.5
306040	4000	5-50	180	100	26	44	114	75	99	62	89	26	8.5
306060	6000	5-75	200	110	32	58	172	97	129	90	127	36	23
306080	8000	5-75	260	140	36	56	170	100	128	90	130	37	26.5
306100	10000	5-100	300	160	40	70	216	116	149	113	113	50	47.5
306101	10000	50-150	300	160	40	66	218	116	150	113	113	50	54

Examples Of Use

• 1 set horizontal lifting gear consists of two clamps with a two-legged chain sling.
• In the standard version, the lifting clamp is suitable for plates up to 1500 mm width. Lifting
   gears with longer chains for larger plate widths are available upon request. The capacity
   applies to a pair of lifting clamps.
• Single clamps are also available.